Landoll Brillion CPPR2-5, Operator And Parts Manual

Page: 17 / 48

ASSEMBLY
9D990-2401 2-7
TABLE OF CONTENTS INDEX
Point Installation
NOTE
When replacing or reversing point, change ALL points at
the same time so that they will have the same operating
depth. If some shanks have worn points and some have
new points, or points of a different design, the chisel plow
will not operate efficiently.
Chisel Plow Point
Install a Chisel Plow Point to each Shank with 1/2-13 x 3
Plow Bolts and Flanged Locknuts.
See Figure 2-8.
Figure 2-8: Chisel Plow Point
Twisted Shovels
Install a LH or RH Twisted Shovel per See Figure 2-3. to
each Shank with 7/16-14 x 2-1/2 Special Plow Bolts and
Flanged Lock Nuts.
See Figure 2-9. LH means that the
soil is thrown left and RH means that the soil is thrown
right. If another arrangement is desired, be sure that the
shovels have balanced positions from right side to left
side. An example of this would be a LH shovel is the same
distance from the center of the machine as a RH shovel is
on the opposite side.
Figure 2-9: Twisted Shovels
Plow Bolt,
1/2-13 x 3
Chisel Point
Flanged
Locknut,1/2-13
Bolt,7/16-14 x 2-1/2
Twisted Shovel,
Right Hand
Twisted Shovel,
Left Hand
Bolt,7/16-14 x 2-1/2
Special Plow
Special Plow
Flanged
Locknut,7/16-14
Flanged
Locknut,7/16-14