Landoll 7831, Operator'S Manual

Page: 8 / 36

1-4 F-801-1115 Edition
INTRODUCTION AND SAFETY INFORMATION
Safety Chain
1. Use a chain with a strength rating equal to or greater
than the gross weight of towed machinery, which is
10,100 pounds minimum in accordance with ASAE
S338.2 specifications. If two or more implements are
pulled in tandem, a larger chain may be required.
Chain capacity must be greater then the TOTAL
weight of all towed implements.
2. A second chain should be used between each
implement.
3. Attach the chain to the tractor drawbar support or
specified anchor location. Allow only enough slack in
the chain to permit turning. The distance from hitch
pin to attachment point or intermediate support point
should not exceed 9 inches.
4. Replace the chain if any links or end fittings are
broken, stretched or damaged.
5. Do not use a safety chain for towing.
Hydraulic Tongue Jack
The HSL comes standard with a hydraulic jack. As
always hydraulics need to be respected because of the
extreme force they are capable of.
1. Operate the jack slowly and with caution.
2. Always make certain the jack leg is completely
retracted after the HSL has been hooked to the
tractor and before moving the HSL.