3-47
11. Models 2411AFG-07-09 install the 8 port manifold to
rear fold tower assembly with 1/2 x 10 bolts, 1/2 lock
nuts as shown
.
Figure 3-42: 8 Port Manifold Installation
2411AFG-07-09
12. Install the hose mount plate to both inner combo
harrow mount arm with the 1/2 x 8-1/2 bolt, 1/2 flat
washer, 1/2 lock nut, the hose clamp attaches with 3/8
x 1-1/2 bolt, 3/8 flat washer, 3/8 lock nut
13. Install the mount plate to both inner combo harrow
mount arm with 1/2 x 6 bolt, 1/2 flat washer and 1/2
lock nut
. Attach the bulkhead tees
w/nut to mount plate.
14. Attach hoses down through the slotted holes of
combo harrow mount arm to cylinders as shown
. The reel base end of cylinder hooks to
top set of holes of 8 port manifold, rod end to bottom
holes of manifold.
Figure 3-43: Hose to Cylinder Installation
15.
for proper hydraulic installation.
8 PORT MANIFOLD,
.75 X .532 X 1.875
ROUND TUBE,
1/2 X 10 BOLT,
1/2 FLAT WASHER,
1/2 LOCK NUT
REAR FOLD
TOWER
ASSEMBLY
SLOTTED HOLES
6”
BASE END
CYLINDER
ROD END
CYLINDER
Summary of Contents for 2411
