3-27
4.
Models 2411AFG-07-09
install the 8 port manifold to
the front side of the wing stop plate on the center
frame using 1/2 x 4 bolts,
and 1/2 lock nuts
Figure 3-19: 8 Port Manifold Installation Rear
5.
Models 2411AFG-07-09
install the 8 port manifold to
the front side of the wing stop plate on the center
frame using 1/2 x 6 bolts, .75 x .532 x 1.875 round
tube and 1/2 lock nuts
.
Figure 3-20: 8 Port Manifold Installation Middle
6.
Install hose fittings in manifolds and cylinders as
shown
See Figures 3-23
.
NOTE
for hydraulic lift layout.
for hydraulic fold layout.
for hydraulic disc gang lift layout.
8 PORT (FOLD)
MANIFOLD
ASSEMBLY,
1/2 X 4 BOLT,
1/2 FLAT
WASHER,
1/2 LOCK NUT
FOLD TOWER
PLATE FRONT
FRONT
NOTE:MANIFOLD
MOUNTS ON BACK
SIDE OF FRONT
PLATE
8 PORT (DISC GANG) MANIFOLD
ASSEMBLY, 1/2 X 6 BOLT,
.75 X .532 X 1.875 BUSHING,
1/2 LOCK NUT
WING
STOP
PLATE
FRONT
NOTE:MANIFOLD
MOUNTS ON FRONT
SIDE OF FRONT PLATE
Summary of Contents for 2411
