ASSEMBLY INSTRUCTIONS
Page 12
STEP 8: ASSEMBLE ADJUSTMENT ROD
Carefully turn the grill assembly over onto its feet.
Insert the adjustment rod [ BF ] into the left panel [ K ]
about 3/4 of the way through. SEE STEP 8A, 8B.
Slide the tension spring [ BJ ] and collar [ BH ] onto the
adjustment rod [ BF ]. Then slide the (2) adjustment
wire and collars [ BG ] onto the adjustment rod [ BF ]
as shown in STEP 8B.
The tension spring, collar and
adjustment wire and collars must be assembled in this
order. SEE STEP 8B. The long wires must be on the
outside. The short wires must be on the inside.
Insert the adjustment rod [ BF ] end into the right
smoke access panel [ L1 ] pin. SEE STEP 8C.
Align the collar [ BH ] to the adjustment rod indentation
and secure the collar [ BH ] with (1) 12MM collar set
screw [ AJ ]. SEE STEP 8D.
Align the adjustment wire and collars [ BG ] to the
indentions in the rod and secure each with (1) 12MM
collar set screw [ AJ ]. SEE STEP 8D.
BLACK DOG 42 XT GRILL & SMOKER
MODEL 590135
®
™
T
AD
U
C
T
AD
7
STEP
8A
STEP
IMPORTANT!
BF
K
CARDBOARD
OR FOAM
AL
AL
B
8B
STEP
BF
BG
LONG WIRE
LONG WIRE
SHORT
WIRES
BH
BJ
8D
STEP
BJ
BH
BF
AJ
AJ
BG
BG
8C
STEP
PIN
BF
INDENTATION
BF
INDENTATIONS
STEP 7: ASSEMBLE WHEEL AXLE, WHEELS
& CASTERS
Insert the wheel axle [ U ] into the holes in leg [ C ].
Slip the wheels [ T ] onto the wheel axle [ U ] as
shown and assemble with (1) wheel axle locknut
[ AD ] on each side. Tighten locknut until the threads
engage the locking plastic on the locknut.
Assemble the casters [ AL ] to the leg [ B ] by
aligning the caster threaded posts to the leg
threaded inserts. Tighten securely.
L1
L1
L1