18
Assembly step 2
5
6
16
16
I
H
16
•
Keeping the champer on its end fasten the leg
clamp using two saucer-head screws M6x50 (I),
four M6 washers, and two M6 nuts (H). Only
introduce the screws into the UPPER holes of the
legs. Turn the smoking chamber around so that it
is standing on the opposite end. Fasten the other
leg clamp (16) using two saucer-head screws
M6x50 (I), four M6 washers, and two M6 nuts (H).
Only introduce the screws into the UPPER holes of
the legs.
DO NOT TIGHTEN BOLTS
.
Assembly step 3
7
I
H
I
H
7
H
A
•
Fasten the leg support bracket (7) using a saucer-
head screw M6x50 (I). Place the leg support
bracket on the inside of the leg that is closest
to the smoking chamber. Introduce the screw
through the leg Clamp and the leg, then through
the leg support bracket (7). Fix it in place there
with an M6 washer and an M6 nut (H). Anchor the
leg support bracket (7) to the smoking chamber
using an M6x15 bolt and an M6 nut to fix it in
in place on the inside of the smoking chamber.
Repeat this process for all four legs.
Assembly step 4
J
D
8
5
8
D
J
6
•
Fasten the leg caps (L) on the bottom of the long
legs (6). Fasten the wheels (8) to the axle of the
short legs (5). Fix in place with an M10 washer
(D) and an M10 lock nut (J).
