Landis+Gyr P450 User Manual Download Page 24

Page: 24 / 90

Page 24 of 90

Issue: 0.4

Using your P450 IHEM

P450 In Home Energy Monitor - DRAFT User Manual

Using your P450 IHEM

6.1

Boot-up sequence

A simple screen including the utilities logo and an activity counter is shown while the P450 IHEM

boots up. Following boot up the P450 IHEM display proceeds to the home screen.

The boot up screen can be seen in the following example.

Figure 7 P450 IHEM Boot-Up Screen

6.2

Operation mode

The operation of the P450 IHEM and the information displayed is dependent on the mode of operation

that has been configured for the P450 IHEM. The P450 IHEM supports two operational modes; Credit

and Prepayment. This document will detail the functionality for both modes of operation and will

denote any areas where the functionality differs.

6.3

Home screen

The P450 IHEM Home screen is used to display the most important and relevant items regarding

energy usage, consumption, and cost of consumption.

It includes the key items:



Cost/Consumption of use now



Cost/Consumption so far today



Days Remaining



Credit Remaining



Consumption/Cost as a proportion of a personal budget (target)

They are additionally displayed as both quantitative (numerals) and qualitative (gauges) items.

The home screen also includes the items and indicators:



Language change



Supply status



Time and date



Unread message present in the in-box

Summary of Contents for P450



























































































Search results

Summary of Contents for P450

Reviews:

Related manuals for P450

Brands by name

Popular brands

Landis+Gyr P450, User Manual

Search results

Summary of Contents for P450

Reviews:

Related manuals for P450

Brands by name

Popular brands