Landis+Gyr P450 User Manual Download Page 17

Page: 17 / 90

Getting Started

Issue: 0.4

Page 17 of 90

P450 In Home Energy Monitor - DRAFT User Manual Commercial in Confidence. © Gyr

Getting Started

3.1

Joining the smart energy network

The P450 IHEM will need to be joined to a ZigBee Smart Energy network that includes at least one

ZigBee Smart Energy Certified Metering Device to receive and display energy consumption data.

The routine for joining is very simple:

If the P450 IHEM determines it is in an un-joined state when it powers on it will scan to find ZigBee

Smart Energy networks available for joining. When an internal list of available networks opens for

joining has been compiled; the P450 IHEM will attempt to join each in turn. Only the network that has

been instructed to allow that specific P450 IHEM to join will permit joining; successful joining therefore

requires registration of the P450 IHEM device with the Utility.

Registration of the P450 IHEM device with the utility could be an end user driven process as

described immediately below or may alternatively be part of an integrated commissioning process

applicable to a wider smart meter installation as described further below.

3.1.1

Consumer controlled joining

If an end user is expected to register the P450 IHEM with the utility themselves the steps below need

to be described or elaborated in any end user literature provided to them:

1. To register the P450 IHEM with your utility contact your energy supplier at the contact point

they have provided (web portal or telephone line) with the

Installation Code

and

MAC

address to hand. You will find the

Installation Code

and

MAC

address on the product

packaging and on the label in the battery compartment of the P450 IHEM. You may need to

remove the battery compartment cover if you have already fitted it as the label is in that

recess.

2. After communicating your product

Installation Code

and

MAC

address to your energy

supplier; return to the P450 IHEM and connect to the mains. This will initiate a join to the

Smart Energy network. Your energy supplier will do the rest and your P450 IHEM will join the

Smart Energy network shortly. When it has joined the network the P450 IHEM will display the

home screen.

Summary of Contents for P450



























































































Search results

Summary of Contents for P450

Reviews:

Related manuals for P450

Brands by name

Popular brands

Landis+Gyr P450, User Manual

Search results

Summary of Contents for P450

Reviews:

Related manuals for P450

Brands by name

Popular brands