Landa ZF2-10021D Operator'S Manual Download Page 3

ZF SERIES PRESSURE WASHER  

OPERATOR’S MANUAL

3

LANDA ZF   

•  

REV. 9/02

INTRODUCTION

Thank you for purchasing a Landa Pressure Washer.

This manual covers the operation and maintenance of
the ZF2-10021D  washer. All information in this manual
is based on the latest product information available at
the time of printing.

Landa, Inc. reserves the right to make changes at any
time without incurring any obligation.

The ZF Series was designed for maximum

use of 1 hour per day, 5 days per week.

Owner/User Responsibility:

The owner and/or user must have an understanding of
the manufacturer’s operating instructions and warnings
before using this Landa pressure washer. Warning infor-
mation should be emphasized and understood. If the op-
erator is not fluent in English, the manufacturer’s instruc-
tions and warnings shall be read to and discussed with
the operator in the operator’s native language by the pur-
chaser/owner, making sure that the operator compre-
hends its contents.

Owner and/or user must study and maintain for future
reference the manufacturers’ instructions.

This manual should be considered a permanent
part of the machine and should remain with it if
machine is resold.

When ordering parts, please specify model and
serial number.

IMPORTANT SAFETY
INFORMATION

CAUTION: To reduce the risk of
injury, read operating instruc-
tions carefully before using.

1. Read the owner's manual thor-

oughly. Failure to follow instruc-
tions could cause malfunction
of the pressure washer and re-
sult in death, serious bodily in-
jury and/or property damage.

2. Know how to stop the machine and bleed pressures

quickly. Be thoroughly familiar with the controls.

3. Stay alert — watch what you are doing.

4. All installations must comply with local codes. Con-

tact your electrician, plumber, utility  company or the
selling distributor for specific details.

To comply with the National Electrical code (NFPA
70) and provide additional protection from risk of elec-
tric shock, this pressure washer is equipped with a
UL-approved ground fault circuit interrupter (GFCI)
power cord.

WARNING: Flammable liquids
can create fumes which can ignite
causing property damage or se-
vere injury.

  5. Risk of explosion — do not

spray flammable liquids or op-
erate in an explosive location.

WARNING: Keep water spray
away from electric wiring or fatal
electric shock may result. Read
warning tag on electrical cord.

  6. To protect the operator from

electrical shock, the machine
must be electrically grounded.
It is the responsibility of the
owner to connect this machine

to a UL grounded receptacle of proper voltage and
amperage ratings. Do not spray water on or near
electrical components. Do not touch machine with
wet hands or while standing in water. Always dis-
connect power before servicing.

  7. Grip cleaning wand securely with both hands before

star ting the cleaner. Failure to do this could result in
injury from a whipping wand.

WARNING: Equipment can produce
a high pressure stream of fluid that
can pierce skin and its underlying
tissue, leading to serious injury and
possible amputation.

  8. High  pressure  developed  by

these machines can cause
bodily injury or damage. Use
caution when operating. Do not
point the spray  gun at anyone
or at any part of the body.

9. Never make adjustments on machine while in op-

eration.

WARNING: High pressure spray
can cause paint chips or other
particles to become airborne and
fly at high speeds.

  10. Eye safety devices must be worn

when using this equipment.

WARNING

KEEP WATER SPRAY

AWAY FROM

ELECTRICAL

WIRING.

WARNING

RISK OF EXPLOSION:

DO NOT USE WITH

FLAMMABLE

LIQUIDS.

WARNING

HIGH PRESSURE

STREAM CAN

PIERCE SKIN AND

TISSUES.

WARNING

USE PROTECTIVE

CLOTHING WHEN

OPERATING.

WARNING

READ OPERATOR’S

MANUAL THOROUGHLY

PRIOR TO USE.

C AUTION

Summary of Contents for ZF2-10021D

























Reviews: