background image

ZF SERIES PRESSURE WASHER  

OPERATOR’S MANUAL

15

P R E S S U R E   W A S H E R S

®

LANDA LIMITED NEW PRODUCT WARRANTY

PRESSURE WASHERS

WHAT   THIS   WARRANTY    COVERS

All LANDA pressure washers are warranted by LANDA, INC. to the original purchaser to be free from defects in materials and
workmanship under normal use, for the periods specified below. This Limited Warranty is subject to the exclusions shown below,
is calculated from the date of the original purchase, and applies to the original components only. Any parts replaced under this
warranty will assume the remainder of the part’s warranty period.

FIVE  YEAR  PARTS  AND  ONE  YEAR  LABOR  WARRANTY:

Components manufactured by LANDA, such as frames, handles, top and bottom wraps, float tanks, fuel tanks, belt guards, and
heating coils.  Internal components on the oil-end of all branded pumps have a five year warranty.

ONE  YEAR  MINIMUM  ON  PARTS  AND  ONE  YEAR  LABOR  WARRANTY:

All other components, excluding normal wear items as described below, will be warranted for one year on parts and labor.  Parts
and labor warranty on these parts will be for one year regardless of the duration of the original component manufacturer’s part
warranty.

WARRANTY  PROVIDED  BY  OTHER  MANUFACTURERS:

Motors, generators, and engines, which are warranted by their respective manufacturers, are serviced through these manufac-
turers’ local authorized service centers. LANDA cannot provide warranty on these items.

WHAT  THIS  WARRANTY  DOES  NOT  COVER

This warranty does not cover the following items:

1.

Normal wear items, such as nozzles, guns, discharge hoses, wands, quick couplers, seals, filters, gaskets, O-rings,
packings, pistons, pump valve assemblies, strainers, belts, brushes, rupture disks, fuses, pump protectors.

2.

Damage or malfunctions resulting from accidents, abuse, modifications, alterations, incorrect installation, improper
servicing, failure to follow manufacturer’s maintenance instructions, or use of the equipment beyond its stated usage
specifications as contained in the operator’s manual.

3.

Damage due to freezing, chemical deterioration, scale build up, rust, corrosion, or thermal expansion.

4.

Damage to components from fluctuations in electrical or water supply.

5.

Normal maintenance service, including adjustments, fuel system cleaning, and clearing of obstructions.

6.

Transportation to service center, field labor charges, or freight damage.

WHAT  YOU  MUST  DO  TO  OBTAIN  WARRANTY  SERVICE

While not required for warranty service, we request that you register your LANDA pressure washer by returning the completed
registration card. In order to obtain warranty service on items warranted by LANDA, you must return the product to your Autho-
rized LANDA Dealer, freight prepaid, with proof of purchase, within the applicable warranty period. If the product is permanently
installed, you must notify your Authorized LANDA Dealer of the defect. Your Authorized LANDA Dealer will file a claim with
Landa, who must subsequently verify the defect. In most cases, the part must be returned to LANDA freight prepaid with the
claim. For warranty service on components warranted by other manufacturer’s, your Authorized LANDA Dealer can help you
obtain warranty service through these manufacturers’ local authorized service centers. If you are unable to resolve the warranty
claim satisfactorily, write to LANDA at 4275 N.W. Pacific Rim Blvd., Camas, WA 98607, ATTN: Warranty Dept., detailing the
nature of the defect, the name of the Authorized LANDA Dealer, and a copy of the purchase invoice.

LIMITATION  OF  LIABILITY

LANDA’S liability for special, incidental, or consequential damages is expressly disclaimed. In no event shall LANDA’S liability
exceed the purchase price of the product in question. LANDA makes every effort to ensure that all illustrations and specifica-
tions are correct, however, these do not imply a warranty that the product is merchantable or fit for a particular purpose, or that
the product will actually conform to the illustrations and specifications. 

THE WARRANTY CONTAINED HEREIN IS IN LIEU OF

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF FITNESS FOR A PAR-
TICULAR PURPOSE.

 LANDA does not authorize any other party, including authorized LANDA Dealers, to make any represen-

tation or  promise on behalf of LANDA, or to modify the terms, conditions, or limitations in any way. It is the buyer’s responsibility
to ensure that the installation and use of LANDA products conforms to local codes. While LANDA attempts to assure that  its
products meet national codes, it cannot be responsible for how the customer chooses to use or install the product.

LANDA ZF   

•  

REV. 9/02

Summary of Contents for ZF2-10021D

























Reviews: