![background image](http://html1.mh-extra.com/html/landa/vhg/vhg_operators-manual_3866478009.webp)
9
Component Identification
Pump
— Delivers a specific gpm to the high pressure
nozzle which develops pressure. (Not Shown)
Spray Gun
— Controls the application of water and
detergent onto cleaning surface with trigger device.
Includes safety latch.
Detergent Valve
— Allows you to siphon and mix deter-
gents.
Wand
— Must be connected to the spray gun.
High Pressure Hose
— Connect one end to water
pump high pressure discharge nipple and the other end
to spray gun.
Rupture Disk
— Secondary pressure release in the
unlikely event the unloader valve fails. (Not Shown)
Unloader Valve
— Safety device which, when the
spray gun closes, prevents over pressurization. (Not
Shown)
NOTE: If trigger on spray gun is released for more
than 3 minutes, water will leak from the pump
protector. Warm water will discharge from pump
protector onto floor. This system prevents internal
pump damage.
Landa VHG Operator’s Manual 8.913-952.0 - BR