19
Assembly Instructions
STEP 1:
Attach the high pressure
hose to the spray gun using teflon
tape on hose threads. Move safety
latch into locked position to prevent
spray gun trigger from activating.
STEP 4:
Connect the garden hose
to pump water inlet. Inspect inlets.
CAUTION: Do not run the pump
without water or pump damage
will result.
STEP 7:
Connect gas valve, with
plastic cover pointing upward, and
pilot assembly to union on machine
and plug in wires.
STEP 2:
Connect the high pressure
hose to the discharge fitting. Push
coupler collar forward until secure.
STEP 5:
Before installing nozzle,
turn on the water supply and run
machine allowing water to run from
the end of the wand until clear.
Turn off machine.
STEP 3:
Connect garden hose to
the cold water source.
STEP 6:
Pull the spring-loaded
collar of the wand coupler back to
insert pressure nozzle. Release the
coupler collar and push the nozzle
until the collar clicks. Pull the
nozzle to make sure it is seated
properly.
Landa VHG Operator’s Manual 8.913-952.0 - BR