HOME DEPOT SGP • 8.913-917.0 • Rev. 08/13
7
PRESSURE
W
ASHER
OPERA
T
OR’S MANU
AL
ASSEMBLY INSTRUCTIONS
STEP 1:
Attach the high pres-
sure hose to the spray gun
using teflon tape on hose
threads.
STEP 3:
Release the coupler col lar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure it
is seated properly.
STEP 5:
Connect the high pres sure
hose to the pump discharge fi tting. Push
cou pler collar forward until secure.
STEP 2:
Pull the spring-load ed col lar
of the wand coupler back to in sert your
choice of pres sure noz zle.
STEP 6:
Connect garden hose to the
cold water source.
STEP 7:
Connect the garden hose
to pump wa ter inlet. In spect inlets.
CAUTION: Do not run the pump
without wa ter or pump damage
will result.
Safety
Latch
Spray
Gun
High Pressure
Hose
Wand
Coupler
Pressure
Nozzle
Pressure
Nozzle
Wand
Coupler
Wand
Collar
Discharge Fitting
High Pressure Hose
Cold
Water
Source
Garden
Hose
Coupler Collar
STEP 4:
Remove shipping
cap and install oil dipstick.
Check pump oil level by using
dip stick or observe oil level in
oil win dow (if equipped). Use
30 wt. non detergent oil.
DipStick
Pump
Water Inlet
Garden
Hose
