LANDA SEA • 8.913-999.0 • Rev. 6/13
OPERA
TOR’S MANU
AL
PRESSURE
W
ASHER
24
HaNDHelD WIReleSS OpeRaTINg INSTRUCTIONS
for Wireless Remote Control Operation
Step 1: Push the control panel pump switch to the "ON"
position (first click). With the switch in this position the
wireless remote is ready for use.
Step 2: To control pressure
washer in remote mode, press
transmitter button 1 to turn pump
"ON". Press transmitter button 2
to turn pump "OFF". Pump can
also be controlled manually by
pressing the control panel pump
ON/OFF switch.
Chemical 1: To start chemical
1 flow, press transmitter button
3. The green indicator light will
illuminate when chemical 1 is in
use. Press button 3 again to stop
chemical 1 flow.
Chemical 2: To start chemical 2 flow, press transmit-
ter button 4. The green indicator light will illuminate
when chemical 2 is in use. Press button 4 again to
stop chemical 2 flow.
When machine is not in use, push control panel pump
switch to the "OFF" position. Store transmitter on the
transmitter bracket.
NOTe: Normal operating range for the transmitter is
about 500 feet interference-fee (line of site); 300 feet
light interference (inside warehouse, pallet shelves);
and 100 feet heavy interference (through concrete/
stone walls, metal doors). If greater range is desired,
the antenna can be mounted at a seperate location.
This requires a longer cable - RG-58-U coaxial with
BNC end connectors.
89139990-16
Transmitter
pump Switch
Transmitter
bracket
Chemical 2
light
Chemical 1
light
antenna
