12
Operations
Insulated Straight Wand
Assembly
Attach the pressure hose to the
spray gun using teflon tape on hose
threads. Attach nozzle, extension
to spray gun/wand. Tighten both by
hand.
Before installing nozzle, turn on
water supply and run machine
allowing water to flush through the
system until clear.
Pull spring-loaded collar of the
wand coupler back to insert your
choice of pressure nozzle or soap
nozzle. Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
NOTE: High pressure nozzle must be inserted at end
of wand to obtain high pressure.
Variable Pressure Wand Assembly
Models using variable pressure wands, grip spray gun
securely. Turn variable pressure control handle counter-
clockwise to reduce pressure and for applying soap
through the brass soap nozzle with detergent injector
attached.
Steam Wand Assembly
This wand assembly is only used on midel HOT 3-
30036D for steam. No high pressure or soap nozzle can
be used.
Variable Pressure
Control Handle
Trigger
Variable Pressure
Wand (VP)
High
Pressure
Nozzle
Brass Soap Nozzle
Steam
Hose
Steam Nozzle
Steam Wand
(3-300)
Landa HOT Series Operator’s Manual 8.917-208.0 - B
Nozzle Extension
Spray
Gun/Wand
Wand
Coupler
Pressure or Soap
Nozzle
Pressure or Soap
Nozzle
Wand
Coupler
Coupler
Collar