10
Operations
Assembly & Operation
Instructions
STEP 1:
Connect the power cord
into the proper electrical outlet,
then push in the GFCI reset button.
(Refer to serial plate for informa-
tion.)
STEP 4:
Pull the spring-loaded
collar of the wand coupler collar
back to insert your choice of
pressure nozzle.
CAUTION: Never replace nozzles
without engaging the safety latch
on the spray gun trigger.
ATTENTION:
Ne jamais
remplacer les buses sans
d'abord mettre le dispositif de
sécurité sur la détente du
pistolet pulvérisateur.
STEP 2:
Connect high pressure
hose to discharge nipple by sliding
quick coupler collar back. (If
detergent is to be applied, insert a
detergent injector.) Insert quick
coupler onto discharge nipple and
secure by pushing quick coupler
collar forward.
STEP 5:
Release the coupler collar
and push the nozzle until the collar
clicks. Pull the nozzle to make sure
it is seated properly.
.
STEP 3:
Attach the high pressure
or steam wand hose to the spray
gun using teflon tape on hose
threads. Move safety latch into
locked position.
STEP 6:
Check oil level by using
supplied dip-stick. Use SAE 10W-
40 non-foaming only.
STEP 7:
Fill fuel tank with proper
fuel
Landa HOT Series Operator’s Manual 8.917-208.0 - B
Detergent
Injector
High
Pressure Hose
Discharge
Nipple
Coupler
Collar
Safety
Latch
High
Pressure
Hose
Spray
Gun
Pressure
Nozzle
Wand Coupler
Collar
Pressure
Nozzle
Dipstick
Dipstick
Fuel
Cap