25
Filter Replacement
STEP 1:
To remove
filters, turn filter housing
counterclockwise.
STEP 2:
Remove the
used filter from the filter
housing, be sure not to
lose the black o-ring.
STEP 3:
Spray gently
with clean running water.
Do not use soap or other
additives which may
cause damage on the
filter
.
STEP 4:
Place the filter
back in the filter housing,
make sure o-ring is in
place, put it back in
position and turn clock-
wise.
Landa ECOS 7000 Operator’s Manual 9.801-316.0 - G
STEP 4:
To filter the finer particulates, push the reclaim pump switch to the "ON" position. The reclaim pump will
push the water through the two filter housing. On the outlet end of the filters is the filtered water valve. In the vertical
position the filtered water is routed back to the inner holding tanks. In the horizontal position the filter water can be
discharged as needed.
WARNING: When disposing of reclaimed water, check with local state and federal laws before disposal.