10
Section 1: Assembly & Set-Up
2/12/21
1. Attach water tanks (#2) to Straw Crimper frame with
3/8"-16 x 1" GR5 cap screws (#6), lock washers (#5),
and flat washers (#4). Tighten bolts to the correct
torque.
2. Make sure vented caps (#1) and drain plugs (#3) are
screwed on tight to the weight tanks.
Water Tanks Option
Figure 1-2
19174
Optional Weight Tanks
Refer to Figure 1-2:
Additional weight may be added to the Crimper with
weight tanks that can be filled with water.
IMPORTANT:
You could loose steering control if
your tractor is too light. Refer to your tractor’s
manual to determine if additional ballast is needed.
