background image

3

Important Safety Information

SPL0548 & SPL0560 Snow Pusher   303-454M

Table of Contents

9/07/16

These are common practices that may or may not be applicable to the products described in 
this manual.

Avoid High Pressure 
Fluid Hazards

Escaping fluid under pressure can 
penetrate the skin causing serious 
injury.

Avoid the hazard by relieving 
pressure before disconnecting 
hydraulic lines or performing work 
on the system.

Make sure all hydraulic fluid 
connections are tight and all 
hydraulic hoses and lines are in 
good condition before applying 
pressure to the system.

Use a piece of paper or 
cardboard, NOT BODY PARTS, to 
check for suspected leaks.

Wear protective gloves and safety 
glasses or goggles when working 
with hydraulic systems.

DO NOT DELAY.

 If an accident 

occurs, see a doctor familiar with 
this type of injury immediately. Any 
fluid injected into the skin or eyes 
must be treated within 
a few hours or 
gangrene may 
result.

Prepare for Emergencies

Be prepared if a fire starts.

Keep a first aid kit and fire 
extinguisher handy.

Keep emergency numbers for 
doctor, ambulance, hospital, and 
fire department near phone.

911

Keep Riders Off 
Machinery

Never carry riders or use 

machinery 

as a person lift.

Riders obstruct operator’s view. 

Riders could be struck by foreign 
objects or thrown from the 
equipment.

Never allow children to operate 
machinery.

Wear 
Protective Equipment

Wear protective clothing and 
equipment appropriate for the job 
such as safety shoes, safety 
glasses, hard hat, and ear plugs.

Clothing should fit snug without 
fringes and pull strings to avoid 
entanglement with moving parts.

Prolonged exposure to loud noise 
can cause hearing impairment or 
hearing loss. Wear suitable 
hearing protection such as 
earmuffs or earplugs.

Operating equipment safely 
requires the operator’s full 
attention. Avoid wearing radio 
headphones while operating 
machinery.

Use Seat Belt and ROPS

Operate only tractors equipped 
with a Roll-Over Protective 
Structure (ROPS) and seat belt. 

Keep folding ROPS in the “locked 
up” position at all times.

Fasten seat belt snugly and 
securely to help protect against 
serious injury or death from falling 
and machine overturn.

Wear protective equipment such 
as a hard hat, safety shoes, safety 
glasses, and ear plugs.

Use Safety 
Lights and Devices

Slow moving tractors, 
self-propelled equipment, and 
towed implements can create a 
hazard when driven on public 
roads. They are difficult to see, 
especially at night.

Flashing warning lights and turn 
signals are recommended 
whenever driving on public roads. 

Summary of Contents for SPL0548



























Reviews: