17
Section 3: Maintenance
SPL0548 & SPL0560 Snow Pusher 303-454M
Table of Contents
9/07/16
Long-Term Storage
Clean, inspect, service, and make necessary repairs to
the Snow Pusher when parking it for long periods and
when parking it at the end of a working season. This will
help ensure that the Snow Pusher is ready for field use
next time you hook-up to it.
1.
Clean off any dirt that may have accumulated on the
Snow Pusher. Scrape off compacted dirt and then
wash surfaces thoroughly with a garden hose.
2.
Inspect Snow Pusher for loose, damaged, or worn
parts. Adjust and tighten loose parts. When needed,
replace parts with genuine Land Pride Parts only.
3.
Repaint parts where paint is worn or scratched to
prevent rust. Ask your dealer for Land Pride aerosol
touch-up paint. Paint is also available in touch-up
bottles with brush, quarts, and gallon sizes by adding
TU, QT, or GL to the end of the aerosol part number.
4.
A light coating of oil or grease may be applied to the
lower wear areas in lieu of paint to minimize
oxidation.
5.
Replace all damaged or missing decals.
6.
Store Snow Pusher on a level surface in a clean, dry
place. Inside storage will reduce maintenance and
make for a longer Snow Pusher life.
7.
Lower Snow Pusher until skid shoes are resting on
support blocks at the back and on the ground at the
front to make the unit tip forward. For detailed
instructions, refer to
“Unhook With BX Quick Hitch”
on page 9 or
“Unhook Without BX Quick Hitch”
on
page 11.
Land Pride Aerosol Touch-up Paint
Part No.
Part Description
821-002C
PAINT LP BLACK AEROSOL SPRAY CAN
821-066C
PAINT ORANGE SPRAY CAN
