Section 6: Specifications & Capacities
RC3615 and RCM3615 Series 2 S/N Rotary Cutters 330-502M
12/12/18
54
Section 6: Specifications & Capacities
RC3615 & RCM3615 Models
Specifications & Capacities
Horsepower range
50 - 160
Gearbox Horsepower
540 rpm or 1000 rpm
160 hp Divider
130 hp Center & Wings
Gearbox lubrication
Gear Lube 80-90W EP
Gearbox oil capacity
Splitter: 3.5 pints; Center deck & Wings: 6 pints
Cutting capacity
2 1/2"
Machine weight
Total weight
Tongue weight
3,730 lbs.
1,240 lbs.
Blade tip speed
At 540 rpm
At 1000 rpm
Center blades = 15,268 FPM & Wing blades = 15,000 FPM
Center blades = 15,578 FPM & Wing blades = 14,620 FPM
Hitch types
Standard Clevis, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch
Hitch jack
Standard (7,000 lbs.)
Signal lights
7 Pin connector
LED
SAE J560 pin configuration
Cutting width
Overall width
Minimum transport width
15'-0"
15'-11 1/2"
7'-11 3/4"
Overall length
15'-6" (With center deck raised fully up)
Deck height
12"
Cutting Height
2" - 14"
Lift hydraulics
3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing hydraulics
2 1/2" x 12" hydraulic cylinders, hoses & fittings
Wing transport protection
Wing Transport Locks
Deck material thickness
10 Gauge
Side skirt thickness
1/4" Steel
Skid shoes
Wing Deck: AR400 1 replaceable skid shoe per wing
Center Deck: AR400 2 replaceable skid shoes
Blades - 6 (2 per carrier)
1/2" x 4" Heat treated
Free swinging alloy steel with uplift
Blade overlap
6"
Blade bolt
Keyed with hardened flat washer & locknut
Stump jumper / blade holder
3/16" Thick round dish shaped pan, reinforced with 1" x 4" blade bar
Front & rear guards
Optional rubber, single row chain or dual row chain
Input driveline 540 & 1000 rpm
Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
Intermediate driveline
Standard - Category 5 with slip-clutch
Wing drivelines
Standard - Category 4 with slip-clutch
Wheel options
6" x 21" Laminated tires, 25.5" new foam filled tires,
29" x 16 ply used aircraft tires without foam filling.
Number of wheels
4 - Wheels: Two on transport axle and one on each wing axle
6 - Wheel option: Four on transport axle and one on each wing axle.
8 - Wheel option: Four on transport axle and two on each wing axle.
Transport axle
Spring-cushioned on center transport axle
Hubs
Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
Deck rings
Optional
