Section 7: Features & Benefits
1/14/19
RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:
60
Section 7: Features & Benefits
RC4610 and RCM4610 Models
Features
Benefits
Surpassed rugged
industry standards
All Land Pride Rotary Cutters have been designed and tested and meet rigorous
voluntary testing procedures according to ISO 4254-13.
Factory assembled
Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
7 Year gearbox warranty
Shows confidence in gearbox integrity. (Years 6 & 7, parts only.)
Rugged heavy built gearboxes
Capable of handling heavy cutting applications.
Gearbox seal protection
Gearbox bottom seal protection for longer bearing life.
2 3/8" Output gearbox shaft
Large output shaft handles shock loads better.
2 Piece shield on wing gearbox
Driveline grease zerks are easier to access.
LED signal lights
LED lights are bright, long lasting, and resistant to vibration, unlike incandescent
counterparts.
LP Performance Hitch
Reduces drawbar wear by keeping hitch level while going through ditches.
Low hitch weight on tractor drawbar
Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
Narrow A-frame hitch
Allows for a tighter turning radius.
Adjustable park jack angle
Park jack can be adjusted to be perpendicular to the ground.
Adjustable driveline hanger
Serves as a support rest for the driveline when the cutter is unhooked from the tractor.
Assist operator when attaching driveline to tractor power take-off shaft.
Input driveline: Cat. 6 CV
Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Drivelines with slip-clutches:
Cat. 5 intermediate
Cat. 4 Wing
Driveline is sized right for the intended cutting capacity.
Slip-clutches will slip under load to minimize twist damage to driveline profiles.
Grease zerks on end caps of
driveline cross journals
Intermediate and wing driveline cross journals are easier to grease.
High Blade tip speed
Allows clean cutting of material.
6" Blade overlap
Eliminates skipping during turns.
Good cutting capacity
Can cut brushy areas with saplings up to 3 1/2".
12" Deck height
Handles heavy cutting, which reduces balling-up of cut material under the deck.
3/16" Round stump jumper
Standard thick stump jumper material keeps damage to a minimum.
Smooth Top Design
Allows for easy cleaning of deck.
Deck sheet tops are 100% welded
Makes center deck and wing deck stronger.
1/4" Sidewall thickness
Increased thickness reduces damage from objects being thrown into deck sidewalls.
Beveled skid shoe on wing
Reduces gouging the ground when turning.
Hinged wing section
Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and
hollows can cause uneven cutting.
1" Solid hinge rods
Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in
the hinge area itself.
Wing transport lock
Transport lock will hold the wing in the folded position in the event of hydraulic loss.
Enclosed dual leveling rods
Cutter pulls equally on the rear axle while traveling over rough terrain.
5-Bolt hubs on trailing arms
5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims
Allows water to drain from wheel(s) mounted on folded-up wing.
Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned trailing arms
Provides independent suspension, cushions loads on cutter and tractor drawbar.
Replaceable wheel spindles
Wheel spindles can be replaced when damaged without replacing entire axle assembly.
7/8" Leveling rods
Large diameter leveling rods provide superior supporting strength over rough terrain.
Wheel options
Laminated tires:
Eliminates flats.
Air filled tires:
Give better cushion while transporting.
Foam-filled tires:
Give better cushion while transporting and can’t go flat.
LP Performance Hitch option
Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
Bar-tite hitch option
Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Deck ring option
Keeps blades from damaging the deck.