Section 5: Maintenance & Lubrication
1/14/19
RC4610 (540 RPM) and RCM4610 (1000 RPM): Rotary Cutters: 334-144M:
54
Gearbox
Method 1:
Unscrew top vented dipstick (#1). Wipe oil
from dipstick and screw dipstick in without tightening.
Unscrew dipstick and check oil on dipstick. If below
bottom level mark, add recommended gear lube through
dipstick hole until oil reaches top mark on dipstick.
Reinstall vented dipstick and tighten.
Method 2:
Remove side oil plug (#2). If oil is below
bottom of plug hole, add recommended gear lube
through top dipstick hole until oil flows out of side plug
hole. Reinstall and tighten side oil plug (#2) and vented
dipstick (#1).
Type of Lubrication: 80-90W EP Gear Lube
Quantity = Fill until oil reaches top mark on dipstick or
begins to flow out side plug hole in gearbox
.
IMPORTANT:
Do not overfill gearbox with oil. Oil will
expand when hot. Make sure implement is level and
oil is cool before checking oil level.
30215
Do Not Overfill
NOTE:
Use a suction or siphon pump to drain
gearbox of oil when there is not an oil drain plug.
8
Hours
23603
Divider Box
Method 1:
Unscrew top vented dipstick. Wipe oil from
dipstick and screw dipstick in without tightening. Unscrew
dipstick and check oil on dipstick. If below bottom level
mark, add recommended gear lube through dipstick hole
until oil reaches top mark on dipstick. Reinstall vented
dipstick and tighten.
Method 2:
Remove side oil level plug. If oil is below
bottom of plug hole, add recommended gear lube
through top oil fill/vended dipstick hole until oil flows out
of side oil level plug hole. Reinstall and tighten side oil
level plug and oil fill/vented dipstick.
Type of Lubrication: 80-90W EP
Quantity = Fill until oil begins to flow out oil level plug hole
in gearbox.
IMPORTANT:
Do not overfill gearbox with oil. Oil will
expand when hot. Make sure implement is level and
oil is cool before checking oil level.
8
Hours
