Land Pride RC3615, Operator'S Manual

Page: 32 / 54

30
Section 4: Options & Accessories
RC3615 (540 RPM) and RCM3615 (1000 RPM) Rotary Cutters 330-502M 4/20/15
Table of Contents
Hydraulic Accessories
Land Pride offers three different kits for raising the deck
wings independently to clear small obstacles in the field
without maneuvering around them.
Hydraulic Wing Control Kit
318-316A HYDRAULIC WING CONTROL KIT
Refer to Figure 4-1:
This kit is for tractors with three duplex outlets. It consist
of two adapter fittings, one hose, and one quick
disconnect coupling. If your tractor is equipped with only
two duplex outlets, an optional control kit is available
from your local Land Pride dealer. See
“Selector Control
Valve Kit” below.
Selector Control Valve Kit
312-316A SELECTOR CONTROL VALVE KIT
Refer to Figure 4-2:
This kit is for tractors needing only one additional duplex
outlet. It converts one of the tractor’s duplex outlets into
two duplex outlets with a control valve. A selector lever on
the control valve selects which wing cylinder is
operational with the tractor hydraulic control lever. It
attaches to the existing elbow fittings at the wing
cylinders and uses the existing quick disconnect
couplings supplied with the cutter to connect to one of the
tractor’s duplex outlets.
IMPORTANT: Never operate a cutter under any
terrain conditions where, on a continuous cut, the
wing angle exceeds 45 degrees up. Damage to the
wing driveline and gearboxes can occur. Raise wing
only enough to clear obstacles and then lower the
wing immediately after.
Follow all safety precautions in this manual
especially information regarding raising the wings up
with PTO running.
Hydraulic Wing Control Kit
Figure 4-1
Selector Control Valve Kit
Figure 4-2
27602
27599