Land Pride RC3615, Operator'S Manual

Page: 39 / 54

37
Section 5: Maintenance & Lubrication
4/20/15 RC3615 (540 RPM) and RCM3615 (1000 RPM) Rotary Cutters 330-502M
Table of Contents
Skid Shoe Maintenance
!
CAUTION
Excessive wear on skid shoes may cause inadequate operation
of cutter and create a safety hazard.
There are two skid shoes mounted on either side of the
center section and one skid shoe mounted on each wing
section. Check all skid shoes for wear and replace if
necessary. Order only genuine Land Pride parts from
your local Land Pride dealer.
Center Skid Shoes
Refer to Figure 5-10:
Replace center skid shoes as follows:
1. Remove 1/2"-13 hex whiz nuts (#4), 1/2" -13 x 1 1/4"
GR5 hex bolts (#3), and right-hand center skid
shoe (#1) from the center deck frame (#2) as shown.
2. Attach new skid shoe (#1) to cutter with existing
1/2" hex bolts (#3), and secure with existing 1/2" hex
whiz nuts(#4). Tighten bolts to the correct torque.
3. Repeat steps 1 & 2 for left-hand center skid shoe.
Wing Skid Shoes
Refer to Figure 5-11:
Replace wing skid shoes as follows:
1. Remove 3/8" hex whiz nuts (#4), 3/8" plow bolts (#3),
and wing skid shoe (#1) as shown.
2. Plow bolts (#3) should be checked for wear and
replaced if necessary.
3. Attach new skid shoe (#1) to cutter with existing
3/8" plow bolts (#3) and secure with 3/8" hex whiz
nuts. Tighten bolts to the correct torque.
4. Repeat on opposite wing section.
Land Pride Skid Shoe Replacement Parts
Part No. Part Description
318-211H CENTER SKID SHOE (RIGHT HAND)
318-212H CENTER SKID SHOE (LEFT HAND)
318-247D WING SKID SHOE
802-466C PLOW BOLT, 3/8" - 16 x 1 1/4" GR5
IMPORTANT: Excessive wear on skid shoes can
weaken cutter side panels and cause damage that
will require extensive repairs. Always replace skid
shoes at the first sign of wearing thin.
Center Skid Shoe
Figure 5-10
Wing Skid shoe
Figure 5-11
27920
27859