10
Introduction
RC3615 (540 RPM) and RCM3615 (1000 RPM) Rotary Cutters 330-502M
4/20/15
Introduction
Owner Assistance
The Online Warranty Registration should be completed
by the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Rotary Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
Model No. _____________Serial No. ______________
For quick reference and prompt service, record model
number and serial number in the spaces provided above
and again on warranty page 51. Always provide model
number and serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for location of your serial number plate.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Rotary Cutter. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1.
Discuss the matter with your dealership service
manager making sure that person is aware of any
problems you may have and has had the opportunity
to assist you.
2.
If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3.
For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
27855
Land Pride welcomes you to the growing family of new
product owners.
This Rotary Cutter has been designed with care and built
by skilled workers using quality materials. Proper
assembly, maintenance, and safe operating practices will
help you get years of satisfactory use from this machine.
Application
The RC3615 and RCM3615 Series Rotary Cutters are
designed and built by Land Pride to provide excellent
cutting performance on gently sloping or slightly
contoured right-of-ways, pastures, set-aside-acres, or row
crop fields. The 15' cutting width and ability to cut weeds
and brush up to 2" in diameter make them well suited for
these applications.
All listed models offer a pull-type self-leveling tongue with
a clevis hitch and Cat. 5 conventional or Cat. 6 constant
velocity main driveline for attachment to 50-160 HP
tractor. The RC3615 attaches to 540 RPM tractors and
RCM3615 attaches to 1000 RPM tractors. Safety guards
around the cutter are offered in either chain or rubber.
See
“Specifications & Capacities”
on page 46 and
“Features & Benefits”
on page 48 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
•
Store this manual in the dry storage tube located on the
center deck.
Terminology
“Right” or “Left” as used in this manual is determined by
facing forward in the direction the machine will operate
while in use unless otherwise stated.
Definitions
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE:
A special point of information that the
operator should be aware of before continuing.
