Section 2: Options, Assembly & Set-Up
1/13/21
RBT3584 & RBT3596 Rear Blades 301-251M
20
Skid Shoes (Accessory)
Kit Bundle
(Pair of skid shoes)
301-333A . . . . . . . . . . . . . . . . . SKID SHOE ASSEMBLY
Refer to Figure 2-9:
1. Remove two 5/8"-11 x 1 3/4" GR5 plow bolts (#3)
from end of blade. Keep hardware for installation of
skid shoes.
2. Attach skid shoe bracket (#2) with 5/8"-11 x 1 3/4"
GR5 plow bolts (#3) and hex flange locknuts (#4).
Tighten hardware to the correct torque.
3. Insert skid shoe (#1) into skid shoe bracket (#2).
Secure with bent pin (#5) and hairpin cotter (#6).
4. Repeat steps 1 through 3 for the other side.
Skid Shoe Assembly (Right-hand Shown)
Figure 2-9
24802
End Plates (Accessory)
Kit Bundle (Pair of End Plates)
Refer to Figure 2-10:
1. Attach right-hand end plate (#1) to moldboard as
shown with two 1/2"-13 x 1 1/2" GR5 hex head cap
screws (#2), spring lock washer (#4), and hex nuts
(#3). Tighten hardware to correct torque.
2. Repeat step 1 for left-hand end plate.
End Plate Assembly (Right-hand Shown)
Figure 2-10
24809
