Section 1: Kit Assembly
12
LX20 Third Function Valve Kit Assembly Instructions Manual No. 380-422M
5/11/23
Hook-up Ports “A” & “B” Hydraulic
Hoses to Bulkhead Mount & Loader
Refer to Figure 1-29 through Figure 1-31:
1. Route swivel end of hydraulic hoses (#26A & #26B)
through hose stay (#2) towards bulkhead mount (#1).
2. Attach swivel end of hydraulic hose (#26B) to bottom
bulkhead fitting (#5B) on bulkhead mount (#1), then
tighten hose fitting.
3. Attach swivel end of hydraulic hose (#26A) to top
bulkhead fitting (#5A) on bulkhead mount (#1), then
tighten hose fitting.
4. Slide the pre-installed hose sleeve (#29) as close as
possible to female couplers (#16).
5. Secure hose sleeve (#29) to both hydraulic
hoses (#26A & #26B) by applying a cable tie (#31) at
each end of the hose sleeve (#29).
6. Install the P-clamp (#30) onto both hydraulic
hoses (#26A & #26B).
7.
Secure P-clamp (#30) to the loader frame with a
3/8-16 bolt (#6), a flat washer (#11), and a flange lock
nut (#9). Tighten fasteners (#6 & #9) to
42 ft-lbs (31 N
·
m).
IMPORTANT:
Hydraulic hoses (#26A & #26B) must
be contained within hose sleeve (#29) prior to use of
the Third Function Valve Kit.
P-clamp Installation - Cab Tractor
Figure 1-30
P-clamp Installation - ROPS Tractor
Figure 1-31
78946
Loader
Frame
26A
26B
30
6
9
11
6
Loader
Frame
30
9
11
26A
26B
78947
Loader Hydraulic Hose Assembly
Figure 1-29
78762
HOSE CONNECTIONS
Hydraulic hose:
#26A
#26B
To valve port:
A
B
Dust plug color:
Green (#24)
Black (#23)
To bulkhead fitting:
5A
5B
U
D
B
F
R
L
Pre-installed hose sleeve (#29)
not shown for clarity purposes.
