Important Safety Information
3/14/23
GS2572, GS2584 & GS2596 Grading Scrapers 303-268M
6
26654
26661
35802
Safety Labels
Your Grading Scraper comes equipped with all safety labels in
place. They were designed to help you safely operate your
equipment. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Refer to this section for proper label placement. Replace
all damaged or missing labels. Order new labels from your
nearest Land Pride dealer. To find your nearest dealer,
visit our dealer locator at www.landpride.com.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement. To install
new labels:
a. Clean surface area where label is to be placed.
b. Spray soapy water onto the cleaned area.
c. Peel backing from label and press label firmly onto the
surface.
d. Squeeze out air bubbles with edge of a credit card or
with a similar type of straight edge.
Important Safety Information
73138
838-615C
On GS2596 Only
Amber Reflector: 2" x 9"
1 Place: On the front end of the left side panel
838-614C
Red Reflector: 2" x 9"
2 Places: On the back end of the two side panels
818-267C
Warning: Read Operator’s Manual / Service hazard
1 Place: On the left front side of the main beam
70335
