Introduction
3/17/20
10
Land Pride welcomes you to the growing family of new
product owners. This Stump Grinder has been designed
with care and built by skilled workers using quality
materials. Proper assembly, maintenance, and safe
operating practices will help you get years of satisfactory
use from this product.
Application
The Land Pride GR1525 Stump Grinder has uses and
applications with contractors, landscapers, and forestry
departments. The Stump Grinder turns large stumps into
small chips.
It features durable carbide teeth mounted to a 1/2" thick
cutting wheel that spins up to 1,100 rpm. Fully
controllable from the operator station, this unit has a
maximum cutting arc of 35 degrees and depth of 10"
below ground.
See
“Specifications & Capacities”
on page 35 and
“Features & Benefits”
on page 36 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To buy a new Operator’s or Parts Manual, contact your
authorized dealer. Manuals can also be downloaded,
free-of-charge, from our website at
www.landpride.com
Terminology
“Right-hand” and “left-hand” as used in this manual is
determined by standing behind the tractor and Stump
Grinder and facing forward.
Definitions
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
IMPORTANT:
A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE:
A special point of information that the
operator should be aware of before continuing.
The parts on your Stump Grinder have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Stump Grinder. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1. Discuss any problems you have with your implement
with your dealership service personnel so they can
address the problem.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
question/problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
73167
Introduction