![background image](http://html1.mh-extra.com/html/land-pride/gr1525/gr1525_operators-manual_3491512018.webp)
Section 1: Assembly & Set-up
3/17/20
14
Dual Remote Bundle
328-151A . . . . . . . . . . Tractor Dual Remote Bundle
Bulk Head Mount Assembly
Refer to Figure 1-4:
1. Attach bulk head mount (#1) to the hitch using
3/8" x 1" bolts (#2), lock washers (#4), and
hex nuts (#3). Tighten nuts to the correct torque.
Refer to Figure 1-5:
2. Install 3/4" bulk head adapters (#8) with o-rings into
left side holes of bulk head mount (#1) as shown.
3. Attach needle valves (#5), and o-ring end of
elbows (#6) to the adapters (#8) as shown.
4. Connect 55" long hose (#13) from the rod end of
swing cylinder (#12) to the top elbow (#6A).
5. Connect 34" long hose (#14) from the base end of the
swing cylinder (#12) to the bottom elbow (#6B).
6. Install 3/4" bulk head adapters (#7A & #7B) into right
side holes of bulk head mount (#1) as shown.
7.
Connect 26" long hose (#10) from the base end of
lift cylinder (#11) to the top adapter (#7A).
8. Connect 55" long hose (#15) from the rod end of
lift cylinder (#11) to the bottom adapter (#7B) on
mount.
9. Attach 44" long hoses (#9), to other side of the
adapters (#7A, #7B & #8).
10. Fasten male couplers (#16) to hoses (#9).
Tractor Dual Remote Bundle
Figure 1-4
73352
Dual Remote Bundle
Figure 1-5
73196
73304
Left
Rig
ht
Port
Cylinder Port
Hose Length
6A
Rod end of swing cylinder . . . . . . . . . . . . . . 55"
6B
Base end of swing cylinder . . . . . . . . . . . . . 34"
7A
Rod end of lift cylinder . . . . . . . . . . . . . . . . . 26"
7B
Base end of lift cylinder . . . . . . . . . . . . . . . . 55"