10
All Flex Mowers
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
AFM4216 Model
Description
Specification / Capacity
Description
Specification / Capacity
Discharge Type
Rear
Cutting Height
3/4" to 5 1/4" (In 1/4” increments)
Cutting Width
16’- 8”
Blade Drive Belt
1 B-Section
Overall Width
16’ -10”
Drive Belt Tension
Spring Loaded Idler with Overcenter
Release
Transport Height
8’ -10”
Blade Bearing
Sealed Ball Bearings
Transport Width
6’- 8” With Lock Pins Installed
Blade Overlap
1 1/4"
Overall Length
15’-0” Mowing Position
13’-4” Transport Position
Blades
3 Each Per Deck
Low Lift (5/16" x 2 1/2" x 25")
Optional Blades:
Medium Lift, High Lift & Mulching
Machine Weight
W/15” tires = 3,315 lbs.
W/18” tires = 3,465 lbs.
Blade Spindle Speed
2,302 R.P.M.
Tractor Horsepower
Minimum 40 HP / Maximum 70 HP
Blade Tip Speed
18,340 F.P.M.
Hitch
Pull Type with Adjustable Clevis and
Safety Tow Chain
Deck Tires
10 each, Air tires with Sealant
18 x 9.5 or 15 x 6.6
Tongue Support
2,200 lb. Capacity Screw Jack
Deck Wheel Spindles 1 1/4” w/Nylon Bushings
Gearbox Support
3/8” Steel Channel
Transport Tires
2 each, 23 x 10.5 with Sealant
Gearboxes
540 RPM
(1)-Splitter & (3)-Wing
Transport Locks
Automatic with Pull Rope Release
Gearbox Lubrication
Gear Lube 80-90W EP
Turning Radius
Zero Turning Radius
Gearbox Oil Capacity 3 - Wings: 3.5 Pints
SD Splitter: 2.125 Pints or
OMNI Splitter: 2.5 Pints
Mowing Capacity
@ 2 mph = 4.0 Acres Per Hour
@ 4 mph = 8.1 Acres Per Hour
@ 6 mph = 12.1 Acres Per Hour
Anti-Scalp Roller
Front Center and
Outside Deck Corners
Wing Deck Flex
23 Degrees Left To Right
22 Degrees Front To Back
Main Driveline (1)
Cat. lV Constant Velocity
with Slip Clutch
Center Deck Flex
10 Degrees Left To Right
22 Degrees Front To Back
Deck Drivelines (3)
Cat. II
Hydraulic Outlets
1 Set Required
Deck Size & Quantity 3 each / 72”
Deck Cylinders
Dual Acting
Deck Overlap
8”
Gauge Wheel Arms
1/4” Wall Square Tubing
Deck Thickness
3/16”
Model 4216 Specification Drawing
17853
315-587S continued on next page
02/07/11
