![background image](http://html1.mh-extra.com/html/land-pride/944730/944730_operators-manual_673025066.webp)
Section 6: Specifications & Capacities
RC5615, RC6615, RCM5615, & RCM6615 Series 2 S/N Rotary Cutters 330-323M
5/6/20
60
Section 6: Specifications & Capacities
RC(M)5615 & RC(M)6615 Series 2
Specifications & Capacities
Model Numbers
RC5615 & RCM5615
RC6615 & RCM6615
Horsepower range
50 to 250 hp (37.3 to 186.4 kw)
Gearbox horsepower
250 hp (186.4 kw) Splitter
210 hp (156.6 kw) Center & Wing
250 hp (186.4 kw) Splitter
210 hp (156.6 kw) Center & Wing
(Blade spindle gearboxes are built heavier)
Gearbox lubrication
Gear lube 80-90W EP
Gearbox oil capacity
5.5 Pints (2.60 L): Divider gearbox
10 Pints (4.73 L): Center deck, LH deck & RH deck spindle gearboxes
Cutting capacity
4" (10.2 cm)
4 1/2" (11.4 cm)
Tongue weight
1,860 lbs (843.7 kg)
Machine weight
Single row chain guards, 6 aircraft wheels, 540 CV main driveline & standard clevis hitch
5,446 lbs (2470.3 kg)
5,660 lbs (2567.3 kg)
Blade tip speed
At 540 rpm
At 1000 rpm
Center blades = 16,300 FPM (82.8 mps)
Wing blades = 16,300 FPM (82.8 mps)
Center blades = 16,300 FPM (82.8 mps)
Wing blades = 16,000 FPM (81.3 mps)
Hitch types
Optional Self-Leveling Clevis Hitch, LP Performance Hitch,
Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
Hitch jack
Standard (7,000 lbs)(3175.1 kg)
Signal lights
7 Pin connector
LED
SAE J560 pin configuration
Cutting width
Overall width
Normal transport width
Minimum transport width
15' - 0" (4.57 m)
15' - 11 3/4" (4.87 m)
9'-1" (2.77 m)
7'-6" (2.29 m) With transport locks & deflectors removed and cylinders fully retracted
Overall length
16' - 0" (4.88 m)
Deck height
12" (30.5 cm)
Cutting Height
2" to 14" (5.1 cm to 35.6 cm)
Lift hydraulics
3 1/2" Bore x 8" stroke hydraulic cylinder, hoses, fittings & stroke control spacers
Wing hydraulics
3" Bore x 8" stroke hydraulic cylinders, hoses & fittings
Wing Transport protection
Wing transport lock pins
Deck material
10 gauge (3.4 mm) top deck and 7 gauge (4.6 mm) bottom deck
Side skirt material
Bolt-on replaceable 1/4" (6 mm) steel
Skid shoes
Wing deck
Center deck
Reversible & replaceable: 2 straight skid shoes and 2 AR400 leading skid shoes.
Replaceable: 2 skid shoes
Blades - 6 (2 per carrier)
1/2" x 4" (1.3 cm x 10.2 cm) Heat treated free swinging alloy steel with up lift
Blade overlap
6" (15.2 cm)
Blade bolt
Keyed with hardened flat washer & locknut
Stump jumper / blade holder
3/16" (5 mm) Thick round dish-shaped pan, reinforced with 1" x 5" (2.5 cm x 12.7 cm)
blade bar; or optional shredder kit
Deck ring
Optional 1/2" x 3" (1.3 cm x 7.6 cm) fully welded
Front & rear guards
Optional rubber, single chain, double chain, or double chain with cable
Input driveline 540 & 1000 rpm
Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
Intermediate driveline
Category 5 star profile with slip-clutch
Wing drivelines
Category 4 star profile with slip-clutch or
optional Cat. 5 w/slip clutch
Category 5 star profile
with slip-clutch
Tire Options
6" x 21" Laminated tires, 25.5" new tire with or without foam fill, 29" x 16 ply used aircraft
tires without foam filling.
Number of wheels
6 - Wheel option: 4 on transport axle and one on each wing axle
8 - Wheel option: 4 on transport axle and two on each wing axle
Transport axle
Spring-cushioned on trailing arms
Hubs
Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts