![background image](http://html1.mh-extra.com/html/land-pride/944730/944730_operators-manual_673025060.webp)
Section 5: Maintenance & Lubrication
RC5615, RC6615, RCM5615, & RCM6615 Series 2 S/N Rotary Cutters 330-323M
5/6/20
54
Gearbox
Method 1:
Unscrew top vented dipstick (#1). Wipe oil
from dipstick and screw dipstick in without tightening.
Unscrew dipstick and check oil on dipstick. If below
bottom level mark, add recommended gear lube through
dipstick hole until oil reaches top mark on dipstick.
Reinstall vented dipstick and tighten.
Method 2:
Remove side oil plug (#2). If oil is below
bottom of plug hole, add recommended gear lube
through top dipstick hole until oil flows out of side plug
hole. Reinstall and tighten side oil plug (#2) and vented
dipstick (#1).
Type of Lubrication: 80-90W EP Gear Lube
Quantity = Fill until oil reaches top mark on dipstick or
begins to flow out side plug hole in gearbox.
IMPORTANT:
Do not overfill gearbox with oil. Oil will
expand when hot. Make sure implement is level and oil
is cool before checking oil level.
30215
Do Not Overfill
NOTE:
Use a suction or siphon pump to drain gearbox
of oil when there is not an oil drain plug.
8
Hours
Divider Box
Method 1:
If included, unscrew top vented dipstick. Wipe
oil from dipstick and screw dipstick in without tightening.
Unscrew dipstick and check oil on dipstick. If below
bottom level mark, add recommended gear lube through
dipstick hole until oil reaches top mark on dipstick.
Reinstall vented dipstick and tighten.
Method 2:
Remove side oil level plug. If oil is below
bottom of plug hole, add recommended gear lube
through top oil fill/vended dipstick hole until oil flows out
of side oil level plug hole. Reinstall and tighten side oil
level plug and oil fill/vented dipstick.
Type of Lubrication: 80-90W EP
Quantity = Fill until oil begins to flow out oil level plug hole
in gearbox.
Do not overfill gearbox with oil. Oil will
expand when hot. Make sure implement is level and
oil is cool before checking oil level.
If oil has been removed from the gearbox, refill
gearbox to plug level or full mark on the dipstick.
Allow time for air to bleed up from the lower cavity,
8
Hours
23603
24852
Oil Level Plug
Oil Fill/Vent Plug
NOTE:
Use a suction or siphon pump to drain
gearbox of oil when there is not an oil drain plug.