![background image](http://html1.mh-extra.com/html/land-pride/39546/39546_operators-manual_673467017.webp)
Section 1: Options & Accessory Set-up
SPL0548 & SPL0560 Snow Pusher 303-454M
11/9/20
13
Unhook With BX Quick Hitch
WARNING
!
To avoid serious injury or death: The Snow Pusher is back
heavy and can tip over backwards easily once unhooked.
Always unhook unit on level ground with support blocks under
the skid shoes at the back to tip the unit forward. Never unhook
unit with back of unit facing downhill.
Refer to Figure 1-6 on page 12:
on page 25 when parking
attachment for long periods or at the end of the
working season.
2. Reduce tractor engine speed to an idle and park
tractor and Snow Pusher on level, solid ground.
3. Lower Snow Pusher until the back of skid shoes are
resting on support blocks (#6) and front of skid shoes
are resting on the ground.
4. Shut tractor down properly. Refer to
5. Remove retaining pins (#3A) and hitch pins (#3B)
from lower clevises (#1).
6. Return to the tractor, start engine, and slowly lower
loader arms while rotating top of quick hitch forward
until j-hook (#5) is below center hitch pin (#2).
7.
Carefully back away from the Snow Pusher and
rotate top of quick hitch back until vertical.
8. Shut tractor down properly before dismounting.
9. Replace hitch pins (#3B) in quick hitch bushings (#4)
and secure with retaining pins (#3A).