![background image](http://html1.mh-extra.com/html/land-pride/39546/39546_operators-manual_673467029.webp)
Section 3: Maintenance
SPL0548 & SPL0560 Snow Pusher 303-454M
11/9/20
25
Long-Term Storage
DANGER
!
To avoid serious injury or death:
Always secure equipment with solid, non-concrete supports
before working under it. Never go under equipment supported
by concrete blocks or hydraulics. Concrete can break,
hydraulic lines can burst, and/or hydraulic controls can be
actuated even when power to hydraulics is off.
WARNING
!
To avoid serious injury or death:
•
Always shut power machine down following the “Shutdown
Procedure” provided in this manual before leaving the
•
Do not alter attachment or replace parts on the attachment
with other brands. Other brands may not fit properly or
meet OEM specifications. They can weaken the integrity
and impair the safety, function, performance, and life of the
attachment. Replace parts only with genuine OEM parts.
Clean, inspect, service, and make necessary repairs to
the Snow Pusher when parking it for long periods and
when parking it at the end of a working season. This will
help ensure that the Snow Pusher is ready for field use
next time you hook-up to it.
1. Clean off any dirt that may have accumulated on the
Snow Pusher. Scrape off compacted dirt and then
wash surfaces thoroughly with a garden hose.
2. Inspect Snow Pusher for loose, damaged, or worn
parts. Adjust and tighten loose parts. When needed,
replace parts with genuine Land Pride Parts only.
3. Repaint parts where paint is worn or scratched to
prevent rust. Ask your dealer for Land Pride aerosol
touch-up paint. Paint is also available in touch-up
bottles with brush, quarts, and gallon sizes by adding
TU, QT, or GL to the end of the aerosol part number.
Land Pride Touch-up Paint
Part No.
Part Description
821-011C
PAINT LP BEIGE SPRAY CAN
821-066C
PAINT ORANGE SPRAY CAN
4. A light coating of oil or grease may be applied to the
lower wear areas in lieu of paint to minimize
oxidation.
5. Replace all damaged or missing decals.
6. Store Snow Pusher on a level surface in a clean, dry
place. Inside storage will reduce maintenance and
make for a longer Snow Pusher life.
7.
Lower Snow Pusher until skid shoes are resting on
support blocks (A) at the back and on the ground at
the front to make the unit tip forward.
Long-Term Storage & Support Blocks
Figure 3-4