Assembly Instructions
Third Function Valve Kit #380-166A & #380-334A Installation Instructions Manual No. 380-167M
1/20/21
4
Bulkhead Mount with Pioneer Couplers
Figure 6
Bulkhead Mount Assembly
1. Attach bulkhead fittings (#24) to bulkhead
mount (#2). Tighten bulkhead locknuts to bulkhead
mount.
Refer to Figure 6:
2. When installing the kit with pioneer couplers, slide
black dust cap (#23) on bulkhead fitting (24B), and
green dust plug (#25) onto bulkhead
fitting (24A).
3. Attach female coupler (#19) to bulkhead
fitting (#24A). Tighten and secure coupler to
bulkhead fitting.
4. Attach male coupler (#11) to bulkhead fitting (#24B).
Tighten and secure coupler to bulkhead fitting.
73066
Bulkhead Mount with Flat Faced Couplers
Figure 7
Cross Beam Mount Assembly
Refer to Figure 6, Figure 7 & Figure 8 on page 5:
1. Remove existing hardware (#5 & #6) from the right-
hand side of loader cross tube “D”.
2. Orient as shown in Figure 8, attach bulkhead
mount (#2) to the right-hand side of loader cross tube
“D” with a new W8-1.25 x 30 bolt (#5) and new W8-
1.25 x 35 bolt (#6), lock washers (#8) and flat washer
(#9). Tighten bolts (#5 & #6) to the proper torque.
3. Connect hoses (#27) to bulkhead fittings (#24).
73065