Introducing the LANCOM Office
|
|
LANCOM Office
|
18
EN
2 ISDN S
0
Status
– Indicates the status of the ISDN-S
0
connection:
3 3 ISDN Chan1
– Status of the first logical ISDN B channel (in router as
well as in CAPI operation):
4 ISDN Chan2
– Status of the second logical ISDN B channel (meaning
see ISDN Chan1)
5 ISDN-1+2
– Indicates, whether the actual ISDN connection is a static or
a dynamic channel bundling.
Not available on
LANCOM 800
Office
6 WAN-Rx/Tx
– This yellow LED indicates the data transfer via the WAN
connection (via DSL or cable modem).
Not available on
LANCOM 800
Office
7 WAN-Link
– This green LED indicates that the Ethernet connection
between
LANCOM Office
and the DSL resp. cable modem is operational.
Not available on
LANCOM 800
Office
8 WAN-Chan
– This LED indicates the status of the WAN connection (via
DSL or cable modem) to the provider. The connection to the provider nor-
mally requires a login with username and password. With time-depen-
off
not connected or no S
0
voltage (many ISDN connections dis-
able the S
0
voltage after a certain, inactive time)
green blinking
initializing (establishing contact with the connection point)
green
ready for use
(S
0
bus activated, TEI existing and D channel protocol checked)
green Power off
LED on, but Power-LED off: device in boot monitoring
off
no connection established
red blinking
incoming
call
green
blinking
outgoing call
red
physical line enabled, protocol negotiation ongoing
green
protocol negotiation (X.75, PPP etc) finished, physical
and logical connection operational
green/red
short red flashes
indication of received data packets
off
no bundled connection active
green
static or dynamic channel bundling connection active
Summary of Contents for Office Series
Page 1: ...LANCOM TM Office series...
Page 47: ...Providing dial up access 47 LANCOM Office EN...
Page 60: ...Technical data LANCOM Office 60 EN...
Page 62: ...Annex LANCOM Office 62 EN...
