manualshive.com logo in svg

Lancom 1722 VOIP, User Manual, Page: 95 / 136

Share
Download
Lancom 1722 VOIP User Manual Download Page 95

LANCOM 1722 VoIP – LANCOM 1724 VoIP

 Chapter 5: Configuring Voice over IP

95

EN

Configure the device as described in the preceding examples:

one line to a SIP provider

ISDN line with MSN mapping

Area and country code for each location

Enter a unique domain for the local VoIP domain which describes the local
VoIP range for the site. Both sites use 

different

 VoIP domains, e.g.

'location_A.internal' or 'location_B.internal'.

Configure the line leading to the SIP PBX with the following values: 

SIP PBX line name: Unique name for the line leading to the remote
site.

PBX SIP domain/realm: Internal VoIP domain for the remote site.

Registrar (FQDN or IP): Address for the LANCOM at the remote site, in
the event that the device cannot be identified via DNS resolution of
the VoIP domain (PBX SIP domain/realm).

Use the private IP address that can be reached via VPN for the
LANCOM here, not the public IP.

Leave the field for the shared password empty when registering to the
SIP PBX.

Leave the field for the public PBX number empty.

Summary of Contents for 1722 VOIP









































































































































Reviews:

No comments