3
ABOUT THE VALVE
THE VOLUMETRIC VALVE DISPENSES POST-MIX BEVERAGES ACCURATELY OVER A BROAD RANGE
OF PRESSURES AND SYRUP VISCOSITIES. CONFIGURATIONS, FROM A CUP LEVER TO A PORTION
CONTROL PANEL INTERFACE, ALLOW THE VOLUMETRIC VALVE TO FIT MANY DIFFERENT
APPLICATIONS. THE VOLUMETRIC VALVE MOUNTS TO A STANDARD LEV® BACK BLOCK AND
UTILIZES THE SAME COVER AS THE LEV®.
SPECIFICATIONS
FINISHED DRINK FLOW RATES:
•
3.0 ounces per sec (88.7 ml/sec), Standard
•
2.25 ounces per sec (66.5 ml/sec)
•
1.50 ounces per sec (44.4 ml/sec)
PRESSURE REQUIREMENTS:
Flowing pressure (at the valve)
Minimum Maximum
Water
40 psig
110 psig
(2.8 Kg/cm2)
(7.7 Kg/cm2)
Syrup (Sugar)
20 psig
70 psig
(1.4 Kg/cm2)
(4.9 Kg/cm2)
Syrup (Diet)
10 psig
70 psig
(0.7 Kg/cm2)
(4.9 Kg/cm2)
ELECTRICAL REQUIREMENT:
24 VAC, 50/60 Hz
MOUNTING
Mounts on the same hole pattern with the same mounting screws as the following valves: Lancer LEV®
Cornelius SF-1 Dole SEV McCann Turbo Flo Jr. Dole FFV
MAINTENANCE TOOLS
When troubleshooting and accessing the Volumetric Valve, the following tools will be needed:
Standard
• #2 Phillips Head Screw Driver
• Flat End Screw Driver
• Dow Corning® 111 Valve Lubricant & Sealant
• Volumetric Valve Hand Held Programmer (Lancer PN 52-1420/02; CCPN 532179)
Optional
• 3/16 inch Hex Socket Driver
• Ohmmeter
BEFORE GETTING STARTED
Each unit is tested under operating conditions and is thoroughly inspected before shipment. At the time of
shipment, the carrier accepts responsibility for the unit. Upon receiving the unit, carefully inspect the carton
for visible damage. If damage exists, have the carrier note the damage on the freight bill and file a claim with
carrier. Responsibility for damage to the dispenser lies with the carrier.