![background image](http://html1.mh-extra.com/html/lancer/s4e-v2-hi-carb-superchiller/s4e-v2-hi-carb-superchiller_installation-operation-and-service-manual_3472372027.webp)
S4E V2 Hi-Carb Superchiller
220V / 60Hz
www.lancerbeverage.com
Page 27 of 27
Hoshizaki Lancer reserve the right to change specifications without notice
Part No: 68000006
Images are for illustration purposes only as product may vary.
012/4
– 23 April 2015
16.
Manufacturer’s Checklist
Checked by
......................................................................
Date
........................................................................
Postmix Tested by
.............................................................................................................................................
Gas Charge
................................................
Icebank Probe fitted
...................................................................
Electrically tested by ................................................. Refrigeration tested by .................................................
TAG No.
............................................................
High temperature probe located on liquid line between coil and receiver / dryer
High temperature probe located on carb pump
Ensure soda releif valve is in the off position
Compressor wiring connections label affixed, wiring checked and label signed
Refrigeration system final check. Ensure evaporator fully frosts.
Check all tube work for rubbing e.g. discharge line, liquid line, TX capillary.
Condenser not touching divider panel or grille.
Agitator blades tight and not touching coils cradle.
Overflow pipe correct height and positioned straight.
All motors and pumps secured and mounted correctly.
All pumps run quietly and carbonator pump switched O.K.
Check icebank probe position and tightness.
Carbonator and plumbing pressure tested. Check for leaks on pumps, clamps, welds, strainers,
carbonator fittings and all joints.
Coils in cradle correctly and spaced.
Postmix tubes not rubbing.
Plumbing strapped correctly and not touching the agitator.
Tube labels on correct tube.
Superchiller sticker correctly positioned and straight.
Attention sticker fitted and correctly positioned.
Clean exterior of unit including power cords.
Condenser filters fitted.
Warning sticker applied
L.P. control operates.
Spreader pin pointing towards tank.
Check body for sharp edges.
Check lid for cleanliness and rough edges. Fit and secure.
Carbonator relief valve fitted and correct.
Copy checklist & file, put manual/checklist and pump insulator kit in plastic bag & place in the tank area.
Customer asset No.
W/O .......................................................................
Affix label here