LEGACY FG
033-0004
Page S.25
REV. 0/04-23-2007
Lancair International Inc., Represented by Neico Aviation Inc., Copyright 2007 Redmond, OR 97756
S.6.E Installing the Nose Gear Mounting Plate
Use the following positioning guidelines for the mounting
plate and the nose gear fairing.
Locating the Mounting Plate
• The fairing mounting plate needs to be installed on the
center line of the nose gear fairing.
• From the center of the mounting plate to the aft end of
the nose gear fairing should be approximately 21”
(52.5 mm).
Positioning the Nose Gear Fairing
• The wheel pant needs to be level.
• From the side the wheel pant needs to be level with the
ground.
Figure S.6.E.1 Installing the nose gear fairing mounting plate
Bend the mounting plate so it fits and flox release.
C
L
Tip:
The fore and aft location of the mounting
plate is determined by bolt holes in the fairing.
You can also measure the distance from the aft
end of the fairing to the center of the mounting
plate. This distance should be 21” (52.5 mm).
Nose gear fairing mounting plate, 3455
C
L
Nutplates, AN426AD3-5
