Lanaform LA190108, Manual

Page: 5 / 92

COMPONENTS OF THE PRODUCT
1) On/Off button
0. Off
1. 2 x 24W low energy fluorescent PLL tubes.
2) Reflective screen
3) Electric cable
USAGE INSTRUCTIONS
• For best results, it is recommended that the LUMINESCENCE lamp be used between the hours of 6
a.m. and 8 p.m.
Installation:
1. Place the LUMINESCENCE on a solid surface such as a table.
2. Plug the power cable into the power socket.
Usage :
• Press the On/Off button (Fig. 2) to illuminate the LUMINESCENCE lamp.
• The recommended period of use for the LUMINESCENCE depends on the distance to the lamp.
Nevertheless, it is generally recommended that the device be used for 2 hours at a luminous
intensity of 2500 lux. You can use the table below to easily calculate the recommended period of
exposure:
Distance Position 1 (2 tubes) Recommended period
+/- 17 cm 10.000 30 mins
+/- 25 cm 5.000 1 hr
+/- 45 cm 2.500 2 hrs
• Position yourself in front of the device.
o The distance between your face and the screen must be between 17 and 50 cm. Adjust this
to the distance that feels best for you and for your eyes in particular.
o You are not required to sit directly opposite the device.
o You can split the duration of your luminotherapy session.
• Do not look directly at the lamp. During the session, you may read, write, use the telephone etc.
• The exposure must be regular over a prolonged period. During the darkest days of the year, repeat
use for at least 7 consecutive days, if not more, depending on your personal requirements.
• After use, stop the lamp by switching the «On/Off» button located on the top of the device to
EN
5