7
/ 60
EN
FR NL DE IT PL CS SK SL HR LT
2 Cleaning the reservoir
every 2 days and cleaning
the transducer every week,
3 Changing the water in the
reservoir every 2 days,
4 Cleaning the device and making
sure that all its parts are comple-
tely dry when it is not in use.
To clean the transducer:
1 Put 2 to 5 drops of vinegar
on its surface and leave them
there for 2 to 5 minutes.
2 Brush the foam off the surface
with a soft brush (Fig. 7,
point 1). Do not use a hard
tool to scrape the surface.
3 Rinse the reservoir of the
base in clean water.
4 Do not use soap, solvent or spray
cleaner to clean the transducer.
To clean the reservoir:
1 Clean the reservoir with
water using a soft cloth and
vinegar if there are any foam
or limescale deposits on the
inside (Fig. 7, point 2).
2 Rinse the reservoir in clean water.
Storage
Having cleaned and dried the device,
store it in a dry, cool place out of the
reach of children.
BREAKDOWNS AND
SOLUTIONS
In the event of a malfunction, under
normal conditions of use, please refer
to the following chart:
sentiment_dissatisfied
No steam, no light indicators
help_outline
If there is no light.
sentiment_satisfied
Check the mode chosen. If you
chose continuous diffusion
with ambient light, check that
the device is plugged in and no
power outage has occurred.
help_outline
The water level in the
reservoir is too low.
sentiment_satisfied
Add water to the reservoir.
help_outline
The temperature of
the unit is too low.
sentiment_satisfied
Place the unit in a room at
ambient temperature for
half an hour prior to use.
help_outline
The mist outlet is blocked.
sentiment_satisfied
Clean the mist outlet to
maintain ventilation.
sentiment_dissatisfied
Mist has an unusual smell
help_outline
The water has been standing
in the reservoir for too long.
sentiment_satisfied
Clean the reservoir and
pour fresh water into it.
sentiment_dissatisfied
Low intensity
help_outline
Too much/too little water
in the reservoir.
sentiment_satisfied
Empty water out of the
reservoir or add water to it.
help_outline
Sediment on the transducer.
sentiment_satisfied
Clean the transducer.
help_outline
The water is too cold.
sentiment_satisfied
Use water that is at
room temperature.
help_outline
The water is not clean.
sentiment_satisfied
Clean the reservoir and
pour fresh water into it.
E-IM-Fidji-001-2.0.indd 7
23/05/2018 11:45:27
