Lanaform Charly, Instructions Manual

Page: 6 / 88

EN
To clean the tank:
Clean the water tank with a soft cloth and vinegar if there is foam OR calcium deposits in it.
If the foam covers the safety switch, put a few drops of vinegar on it and clean it with the brush.
Rinse the tank with clear water.
Storage:
Clean and dry the ultrasonic humidifier carefully, complying with the maintenance instructions.
Let it dry completely before storing it. Do not store with water in the base.
Store the appliance in a dry cool place, out of the reach of children.
PROBLEMS AND SOLUTIONS
Problem Possible causes Solutions
No wind, no mist No electric current Plug in the appliance
Main switch closed Turn on main switch
The water level in the groove is too
high
Remove water from the groove
Leak in the water tank Close the lid properly
Wind, but no mist
No water in the tank Fill the tank
The water level indicator is not in the
right position
Correctly reposition the water level
indicator
The temperature of the unit is too
low
Put the unit in a room at ambient
temperature for half and hour before
use
Strange mist smell Water has beens stagnating too long
in the tank
Clean the tank and add clean water
Too little intensity Too much water in the groove Empty water from the groove and put
the tank back
Mist adjustment is set at a minimum Adjust intensity adjustment knob
Sediment on the transducer Clean the transducer
Water too cold Use water at ordinary temperature
Water is not clean Clean the tank and add fresh water
The mist does not rise The mist intensity is set at minimum Adjust the intensity
The tank and the base are not
perfectly matched
Correct this
The ventilator does not function
correctly
Ask a professional to verify the
ventilator in the base
6