23
2.2.5.11. Service
Reserved to LAMY RHEOLOGY engineers.
3. MEASURING WITH YOUR DEVICE
This section will show how use the different measuring system with your device.
Viscometer need to be installed as shown in section 1.5 before read following section.
3.1. INSTALLATION OF MEASURING SYSTEM
Read the installation of your measuring system in the following sections before inserting it on
your viscometer. Indeed some measuring systems require the installation of accessory before
the insertion of the spindle.
As the FIRST PLUS LR get only one kind of bayonet coupling system, way to install measuring
bob on shaft of viscometer is always the same. You will find below how to install your
measuring bob. But please refer to specific section according to your measuring system to get
more information.
Insert the measuring system with the bayonet coupling into the motor shaft by pushing and
turning slightly so that the pin is lodged in the space provided.
Pin
Motor shaft
