Setting the TIME DELAY function
1.
Set a heating function and temperature.
2.
Press
again and again until starts to flash.
3.
Press or to set the minutes for DURATION.
4.
Press
.
5.
Press or to set the hours for DURATION.
6.
Press
.
The display shows flashing .
7.
Press or to set the END time and press
. First you set the minutes and then the
hours.
The oven turns on automatically later on, works for the set DURATION time and stops at
the set END time. When the set time ends, the signal sounds for 2 minutes. The display
shows flashing and the time setting . The oven turns off automatically.
8.
Press a sensor field to stop the signal.
9.
Turn off the oven.
When the Time delay function is turned on, the display shows a symbol of the
heating function, with a dot and . The dot shows which clock function is on
in the Clock / residual heat display.
Setting the SET+GO
You can use the SET+GO function only when the DURATION is set.
1.
Set a heating function and temperature.
2.
Set the DURATION.
3.
Press
again and again until the display shows flashing .
4.
Press
to set the SET+GO function.
The display shows and with an indicator. This indicator shows which clock function is
activated.
5.
Press a sensor field (apart from ON / OFF) to start the SET+GO function.
Setting: Minute Minder
1.
Press .
The display shows flashing and "00".
2.
Press to switch between options. First you set the seconds, then the minutes and
the hours.
3.
Press or to set the MINUTE MINDER and to confirm.
4.
Press
or the MINUTE MINDER starts automatically after 5 seconds.
When the set time ends, the signal sounds for 2 minutes and the display shows flashing
00:00 and .
5.
Press a sensor field to stop the signal.
COUNT UP TIMER
1.
To reset the Count Up Timer press: and at the same time .
2.
When the display shows "00:00" the Count Up Timer starts to count up again.
15
