23
Instructions and Installation
Before installation
The product must only be installed
by suitably qualified persons.
The product must be installed
in accordance with all local
regulations.
Prior to installation, visually
check the product for any
damage / defects. Do not
install if any issues are found.
Damaged products may cause
risks to your own safety.
• The appliance is intended for
installation in Howdens kitchen
cabinets.
• Surfaces, synthetic laminates
and adhesives used must be
heat resistant.
• Kitchen cabinets must be set
level and fixed.
• If there is a drawer beneath the
oven, a shelf must be installed
between oven and drawer.
• The following installation
drawings are representational
and may not match exactly
with your appliance.
12. Installation
350mm
560mm
560mm
585mm
(min)
560mm
548.5 mm
560mm
577.5 mm
548.5 mm
20 mm
20 mm
560 mm
min depth
560 mm
min depth
*
*
*
577.5 mm
595mm
595mm
595mm
595mm
585mm
(min)
Built under installation
**The oven may need to be
positioned lower in the cabinet
to fit with some hobs.
*Minimum of 150mm2 ventilation
gap is required as illustrated
(min 45mm x 350mm) cut -out
positioned centrally.
Note:
remove carcass rear panel
to assist with ventilation.
Tower Installation
Summary of Contents for LAM3412
Page 2: ......