22
www.howdens.com
Built-in Single Fan Oven
LAM3412 LAM3413 LAM3414
Removing and cleaning
wire racks
1. Remove the wire racks by
pulling them in the direction of
the arrows (see below)
2. To clean the wire racks either
put them in the dishwasher or
use a wet sponge, ensuring that
they are dried afterwards.
3. After the cleaning process install
the wire racks in reverse order.
560mm
560mm
585mm
(min)
560mm
548.5 mm
560mm
577.5 mm
548.5 mm
20 mm
20 mm
560 mm
min depth
560 mm
min depth
*
*
*
577.5 mm
595mm
595mm
595mm
595mm
585mm
(min)
Built under installation
**The oven may need to be
positioned lower in the cabinet
to fit with some hobs.
*Minimum of 150mm2 ventilation
gap is required as illustrated
(min 45mm x 350mm) cut -out
positioned centrally.
Note:
remove carcass rear panel
to assist with ventilation.
Summary of Contents for LAM3412
Page 2: ......
