Lamona LAM3304, Instructions & Installation Manual

Page: 21 / 28

Exclusive to Howdens Joinery.co Page _ 21
User manual LAM3304
Cooling fan
Your oven comes prefitted with a mains cable. If you need to change it:
1. Open the terminal block cover with screwdriver.
2. Pass the mains lead under the cable clamp and secure clamp with the screw over the outer cable
insulation
3. Connect the cables according to the supplied diagram.
4. Close the cover of the terminal block once the wiring is complete.
5. Mains cable must not be longer than 2 metres for safety reasons.
6. The mains lead should be routed away from the appliance and not be trapped between the
appliance and the wall.
Installation
Slide the oven into the cabinet and secure
using the two screws supplied as indicated.
Final check
Connect the appliance to the mains supply,
switch on the mains supply and check the
oven’s functions,
1 Fan
2 Control panel
3 Door
The Built-in cooling fan cools both the front of
the appliance and cabinetry.
Do not switch the oven off at the mains
isolation switch immediately after cooking.
Cooling fan continues to run for up to 20-30
minutes (approx) even after the oven control
is turned off.
L N
Terminal
Live: Brown
Earth: Green /
Neutral :
Cable clamp